|
|
|
F-flying Technology Co.,Ltd
|
|
| |
| Products |
|
 |
Lithium Balance Charger/Discharger, Digital Charger (Model: B6 V8) |
|
|
|
|
|
 Click to enlarge image
|
Lithium balance charger/discharger (Model: B6 V8)
V8 is the Newest in B6!!
Specification
Operating voltage
DC 11~18 volts
Idling current
approx. 100mA
Charge/discharge power
max. 50/5W
NiCd/MH
1~15 cells
LiIo/LiPo/LiFe
1~6 series
Pb
2~20V
Charge current
0.1 to 5.0A
Discharg current
0.1 to 1.0A
No. of cycle
1 to 5 times
Battery data memory
up to 5 data
Weight
260g
Dimension
117x85.5x30 mm
User's setting-up parameters
Lithium battery voltage type
LiIo:3.6V, LiPo:3.7V, LiFe:3.3V
NiCd Delta-peak voltage sensitivity
5 to 20mV
NiMH Delta-peak voltage sensitivity
5 to 20mV
Battery temperature cut-off
20 to 80C or OFF
Waste time between charge/discharge
1 to 60 min.
Trickle charge mode
ON/OFF, up to 200mA
Integral timer limit for safety
10 to 720 min.or OFF
Maximum charging capacity limit for safety
10 to 9990mAh or OFF
Key beep and buzzer sound
ON/OFF
Input power low alert
10 to 11V
Welcome you orders!
âOperating software
Every operating program in the unit is controlled with mutual links and communications to prevent every possible error, so it introduces the maximum safety, such as input voltage warning, reverse polarity protection and Lithium cell-count input error warning.
âIndividual voltage balancer for Lithium batteries
B6 V8 has an individual cell voltage balancer inside. So it does not need any balancer separately when charging Lithium batteries (LiIo/LiPo/LiFe) for voltage balancing.
âAccept various types of Lithium battery
B6 V8 can accept three types of Lithium batteries - LiIo, LiPo and LiFe. They have different characteristics by their chemistry. You can select any one of them that you are going to process before the job. For their specifications, refer 'Warnings and safety notes' section.
âLithium battery 'Fast' and 'Storage' mode
You can charge Lithium battery for special purposes. 'Fast' charge reduces the charging time of Lithium battery and 'Storage' mode controls the final voltage of the battery to be suit for long time storage.
âMaximum safety
Delta-peak sensitivity : The automatic charge termination program works on the principle of the Delta-peak voltage detection. (NiCd/NiMH) Auto-charge current limit : When charging NiCd or NiMH at 'AUTO' current mode, you can set the upper limit of charge current to avoid from feeding high current to the battery. This is very useful when charging the low impedance and small capacity NiMH battery in 'AUTO' mode.
Capacity limit : The charging capacity always calculated by multiple of the charging current and time. If the charging capacity exceeds the limit the process will be terminated automatically when you set the maximum value.
âData store/load
For users convenience it can store maximum 10 data of different batteries. You can establish the data contains program setting of the battery to charge or discharge continually. These data can be called out at any time you need and the process can be executed without program setting.
âCyclic charging/discharging
Perform 1 to 5 cycles of charge>discharge or discharge>charge continually for battery refreshing and balancing.
âPC based analysis using USB communication
For technical expert, B6 V8 offers PC based program can analysis the characteristic of the battery by USB port. It shows a graph of voltage, current, capacity and temperature curves. It also shows the individual voltage of each cell in the Lithium battery pack.
âRobust outer aluminum case
High-quality aluminum case is durable and very efficient to cool out the internal heat
|
|
 Delivery lead time |
within 7days after payment |
| Minimum order |
50pcs |
| Supply ability |
30000pcs/month |
|
|
| |
|
|
|
Related Keywords:
Bookmark / Share this page